Auto Repair Vancouver WA
What Fluid Changes Do Cars Need?
May 5, 2022
Show all

Why Is My Check Engine Light On?

Auto Repair Vancouver Washington

If your check engine light is on, it means your car’s engine computer has detected a problem. The light could be caused by a loose gas cap, a problem with the emissions system, or many other issues. Because this light could indicate any number of problems, you should not ignore the light if it comes on. You should take your car to a mechanic as soon as possible. Ignoring the check engine light can lead to serious engine damage, so it’s always best to err on the side of caution and take your car to an auto repair shop.

It can be frustrating when your check engine light comes on. Not only does it interrupt your journey, but it also raises a lot of questions. Why is the light on? Is there something wrong with my car? Is it safe to keep driving? While the check engine light can signal various issues, there are a few common reasons why it may come on.

Spark Plug Issues

Spark plug issues are a fairly common cause of a check engine light. Over time, spark plugs can become fouled or damaged, causing misfires that trigger the check engine light. Replacing spark plugs is typically a fairly easy fix, although it may require special tools depending on the vehicle.

A spark plug is an essential part of a car’s engine; if it is not working correctly, it can cause several problems. One common issue is that the engine may misfire or run rough. This can happen if the spark plug is not firing correctly or is fouled with oil or dirt. Another problem is that the engine may hesitate or stall when trying to start. This can be caused by several factors, including a dirty spark plug or a defective coil. If you are having trouble with your car’s engine, it is essential to have the spark plugs checked by a qualified mechanic.

Faulty Oxygen Sensor

Another potential cause of your check engine light is a faulty oxygen sensor. The oxygen sensor is responsible for monitoring the air-fuel mixture in the engine, and a faulty sensor can cause the engine to run lean or rich.

Left untreated, a faulty oxygen sensor can significantly impact your car’s performance. The oxygen sensor helps monitor the oxygen level in the exhaust and adjust the air-fuel mixture accordingly. If the oxygen sensor is not working correctly, it can cause the engine to run rich or lean. This can lead to a decrease in fuel efficiency and increased emissions. In some cases, a faulty oxygen sensor can also cause engine misfires and damage the catalytic converter.

If you suspect that your oxygen sensor is not functioning properly, it is important to take it to a repair facility. Auto inspections are cheaper than dealing with more serious damage.

Catalytic Converter Issues

Another possibility is that the catalytic converter needs to be replaced. The catalytic converter helps reduce harmful emissions from the engine, and a damaged converter can cause an increase in emissions. In either case, it’s important to have the issue diagnosed by a qualified mechanic as soon as possible. Otherwise, you run the risk of causing further damage to your car.

A catalytic converter is an essential component of a car’s exhaust system. Its job is to convert harmful emissions from the engine into less harmful substances before they are released into the atmosphere. However, catalytic converters can sometimes become clogged or damaged, resulting in increased emissions and decreased fuel efficiency. There are many possible causes of catalytic converter problems, so it is crucial to diagnose the issue as soon as possible. If you suspect that your catalytic converter is not working properly, it is vital to have it checked by a qualified mechanic.

Left untreated, a faulty catalytic converter can cause severe damage to your car’s engine and ultimately lead to costly damage repair. A little preventative auto service is definitely a better choice.

Gas Cap Problems

You might be surprised to learn that something as simple as a loose or cracked gas cap could cause your check engine light. When the gas cap is not firmly in place, it can allow fumes and vapors to escape from the tank. This can lead to a loss of pressure in the system, which can, in turn, cause the fuel pump to work harder and the engine to run less efficiently. This can cause several car problems, ranging from decreased fuel efficiency to engine damage.

In addition, a loose gas cap can allow dirt and debris to enter the tank, clogging up the fuel filter and causing engine damage. Luckily, this is a simple fix. You just need to ensure that the gas cap is securely fastened before driving. By taking this simple precaution, you can help avoid a number of costly car repairs.

How to Deal With a Check Engine Light

In short, the only way to know for sure what’s causing your problem is to take your car to an auto repair shop for an inspection. A qualified auto mechanic will be able to diagnose and fix your car’s issues, ensuring that you can get back on the road with confidence. They might even catch a problem you didn’t know you had!

In most cases, diagnosing a check engine light is pretty straightforward, especially in newer vehicles. However, if the problem is more complex, it may require further diagnosis and repairs. Regardless, it’s always best to have the problem checked out as soon as possible so you can avoid more severe issues down the road

Call Art Morse Auto Repair!

At Art Morse, we’re experts at diagnosing your engine problems. We do detailed digital inspections on newer models of vehicles, but if you have an older car, our experienced mechanics are prepared to diagnose it the old-fashioned way. No matter what, you can count on us to find out the problem and how to fix it. Our expert car mechanics strive for quality service at all times. We stand by our work with a 2-year/25,000-mile warranty. if you want honest repairs, come to Art Morse. Our exceptional and affordable auto repair services will get you back on the road quickly and safely. Give us a call to get started.

Comments are closed.